Weather Accelerated Aging UV Test Machine
Accelerated Weather UV test machine is applicable for the sunlight resistant test of nonmetallic materials and aging test of artificial light sources. A variety of industrial products can make the reliability test, and this product can simulate the product in the sun, rain, humidity and dew conditions, including damage caused by bleaching, color, brightness down, powder, crack, blur, brittle, intensity decreased and oxidation.
| Model |
KJ-2030 |
| Inner Box Size |
50×50×60cm |
| Temperature Range |
Normal Temperature~200°C |
| Control Mode |
Automatic Calculation Controller |
| Temperature Display |
0.1°C |
| Control Accuracy |
± 3°C |
| Distribution Accuracy |
± 1°C(at-100°C) |
| Time Memory |
0-999 hours, Power Failure Memory Type, with Buzzer |
| Wheel Speed |
45cm,10±2 round/ min |
| UV Light Source |
UV300W Bulb |
| Standard Accessories |
Shelf Board 2 pieces |
| Heating Method |
Hot Air Circulation |
| Security Devices |
Over-temperature power-off indicator light;Safety overload switch ammeter |
| Manufacturing Material |
Internal Stainless Steel SUS304;External Advanced Baking Varnish |
| Outside Dimension (L×W×H) |
100×65×114 cm |
| Weight |
90 kg |
| Power |
AC220V, 50/60Hz, single phase |
| Standard |
JIS-P8127; ASTM D1148... |
Chamber Structure:
The inner bladder of the chamber is made of imported high-class stainless steel plate while the outer bladder is made of SUS 304 steel plate.
The heating mode adopts inner bladder trough type heating with its rapid temperature rise and even temperature
UV test machine applicable standards
(1) ISO 48-3-2006, Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps;
(2) ASTM D4329-2005, Standard Practice for Fluorescent UV Exposure of Plastics;
(3) ASTM D4587-2005, Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings;
(4) ASTM D5208-2001, Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics,
(5) ASTM D4799: Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
(6) ISO 4892-1: Plastics - Methods of Exposure to Laboratory Light Sources - Part 1: General guidance
(7) ISO 4892-3: Plastics - Methods of Exposure to Laboratory Light Sources - Part 3: Fluorescent UV Lamps
(8) AATCC TM186: Weather Resistance: UV Light and Moisture Exposure
(9) IEC 61345: UV Test for Photovaltalic (PV) Modules
Product Tags:
|
|
Weather Accelerated Aging 200 Degree 300W UV Testing Machine Images
|
